[AsiaNet] Polyplastics Launches New DURANEX(R) Flame-retardant PBT Grade with
Low Warpage and Hydrolysis Resistance for Automotive Applications
AsiaNet 80730
(TOKYO, Sept. 26, 2019 AsiaNet=연합뉴스) The Polyplastics Group has announced the launch of a new DURANEX(R) polybutylene terephthalate (PBT) grade that has the outstanding electrical properties traditionally found in PBT, while also offering other important performance attributes. DURANEX(R) 750AM is a 30% glass-reinforced flame-retardant (FR) grade with low warpage, high rigidity, and heat and moisture resistance (hydrolysis resistance).
(Image: https://kyodonewsprwire.jp/prwfile/release/M100475/201909241212/_prw_PI1fl_6JmCISox.jpg)
DURANEX(R) 750AM is ideally suited for automotive applications such as communications devices and high-pressure parts for electric vehicles (EVs) and hybrid electric vehicles (HEVs).
Until now, it has been difficult to satisfy requirements for both flame resistance and hydrolysis resistance because hydrolysis resistance typically decreases with the addition of a FR component. There has been an increasing demand for FR materials in the automotive market for use in communication devices and high-pressure parts for EVs and HEVs. These materials must also meet the auto industry's need for high durability and outstanding formability. DURANEX(R) 750AM and other PBTs also meet the demands of electrical and electronics applications.
Polyplastics can produce low-warpage PBT materials such as DURANEX(R) 750AM via three methods. First, the anisotropy of the shrinkage rate can be reduced by using spherical and plate-like fillers with low aspect ratios rather than fiber fillers. This reduces warpage, but can also adversely affect mechanical strength.
Second, the absolute value of the shrinkage rate can be reduced by forming alloys with amorphous resins such as polycarbonate (PC) and styrene-acrylonitrile (SAN). This method results in a small reduction in mechanical strength, while the amorphous resin also has an effect on thermal properties and other factors. Third, improving flowability and reducing pressure distribution (shrinkage rate distribution) inside the cavity can reduce warpage, though not as much as the aforementioned two methods.
Please also visit: https://www.polyplastics.com/en/product/lines/pbt_750am/index.html
About Polyplastics
The Polyplastics Group is a global leader in the development and production of engineering thermoplastics. The Group's product portfolio includes PBT, polyoxymethylene (POM), polyphenylene sulfide (PPS), liquid crystal polymer (LCP), and cyclic olefin copolymer (COC). With more than 50 years of experience, the company is backed by a strong global network of R&D, production, and sales resources.
DURANEX(R) is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
Source: Polyplastics Co., Ltd.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
<저작권자(c) 연합뉴스, 무단 전재-재배포 금지>
Low Warpage and Hydrolysis Resistance for Automotive Applications
AsiaNet 80730
(TOKYO, Sept. 26, 2019 AsiaNet=연합뉴스) The Polyplastics Group has announced the launch of a new DURANEX(R) polybutylene terephthalate (PBT) grade that has the outstanding electrical properties traditionally found in PBT, while also offering other important performance attributes. DURANEX(R) 750AM is a 30% glass-reinforced flame-retardant (FR) grade with low warpage, high rigidity, and heat and moisture resistance (hydrolysis resistance).
(Image: https://kyodonewsprwire.jp/prwfile/release/M100475/201909241212/_prw_PI1fl_6JmCISox.jpg)
DURANEX(R) 750AM is ideally suited for automotive applications such as communications devices and high-pressure parts for electric vehicles (EVs) and hybrid electric vehicles (HEVs).
Until now, it has been difficult to satisfy requirements for both flame resistance and hydrolysis resistance because hydrolysis resistance typically decreases with the addition of a FR component. There has been an increasing demand for FR materials in the automotive market for use in communication devices and high-pressure parts for EVs and HEVs. These materials must also meet the auto industry's need for high durability and outstanding formability. DURANEX(R) 750AM and other PBTs also meet the demands of electrical and electronics applications.
Polyplastics can produce low-warpage PBT materials such as DURANEX(R) 750AM via three methods. First, the anisotropy of the shrinkage rate can be reduced by using spherical and plate-like fillers with low aspect ratios rather than fiber fillers. This reduces warpage, but can also adversely affect mechanical strength.
Second, the absolute value of the shrinkage rate can be reduced by forming alloys with amorphous resins such as polycarbonate (PC) and styrene-acrylonitrile (SAN). This method results in a small reduction in mechanical strength, while the amorphous resin also has an effect on thermal properties and other factors. Third, improving flowability and reducing pressure distribution (shrinkage rate distribution) inside the cavity can reduce warpage, though not as much as the aforementioned two methods.
Please also visit: https://www.polyplastics.com/en/product/lines/pbt_750am/index.html
About Polyplastics
The Polyplastics Group is a global leader in the development and production of engineering thermoplastics. The Group's product portfolio includes PBT, polyoxymethylene (POM), polyphenylene sulfide (PPS), liquid crystal polymer (LCP), and cyclic olefin copolymer (COC). With more than 50 years of experience, the company is backed by a strong global network of R&D, production, and sales resources.
DURANEX(R) is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
Source: Polyplastics Co., Ltd.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
<저작권자(c) 연합뉴스, 무단 전재-재배포 금지>
관련뉴스
