[PRNewswire] Chroma Launches NEW 2-in-1 Bidirectional DC Power Supply +
Regenerative Load
(TAOYUAN, Taiwan, May 19, 2020 PRNewswire=연합뉴스) The 62000D Series bidirectional power supplies with power rated 0-600V / 0-120A / 18kW newly launched by Chroma ATE are packaged in a 3U (13.3 cm) high power density design. This series offers two-quadrant operation, enabling both DC power supply output and regenerative DC load. The absorbed energy feeds back to the grid with a conversion efficiency up to 93% and can operate in constant voltage, constant current, and constant power modes. Compared to traditional power supply and load, the 62000D bidirectional DC power supply saves space, reduces energy loss and heat dissipation, and is easier to wire and configure.
Chroma 62000D also works as a battery simulator. Using softpanels, it can simulate state of charge (SOC) conditions or load specific battery characteristic V-I curves to conduct charge and discharge evaluation and testing of the onboard charger, storage device and motor driver. Its front panel intuitive touch screen and intelligent operating interface greatly shorten the test time and simplifies complex test processes.
Renewable energy sources such as PV, EV, fuel cell, and battery are the market trend as the replacement of traditional energy sources. With increasing adoption of electric vehicles worldwide and the growing demand of energy storage batteries for grid connection, the distributed energy storage in microgrids is being commercialized faster than ever. The bidirectional design of power conversion devices requires battery applications to achieve high efficiency, high voltage conversion, and high power density direction, which prompts the need for battery simulation (bidirectional power supply) testing designs.
Application
- Charge/discharge testing and life cycle testing, including BOBC, DC-DC conversion, and PCS
- Motor driver testing for DC-AC power supply and energy feedback
- Compliant with LV123 and LV148 standards on electrical car components testing
- I-V power source simulation of energy storage, battery, and fuel cell in microgrid labs
- Battery power simulation for testing powertrain and auxiliary systems such as electric vehicles and e-scooters, stacker trucks, and ships
Click here [http://www.chroma-group.com/chroma/new_release/62000D.pdf ] to view PDF document.
Product Contacts
info@chromaate.com
www.chromaate.com
Taiwan
Chroma ATE Inc. (headquarters)
T: +886-3-327-9999
U.S.A.
Chroma Systems Solutions, Inc.
T: +1-949-600-6400
Europe
Chroma ATE Europe B.V.
T: +31-318-648282
Chroma Germany GMBH
T: +49-821-790967-0
Japan
Chroma Japan Corp.
T: +81-45-542-1118
Korea
Chroma ATE Korea Branch
T: +82-31-781-1025
China
Chroma Electronics (shenzhen) Co., Ltd.
T: +86-755-2664-4598
Southeast Asia
Quantel Pte Ltd. (a company of Chroma Group)
T: +65-6745-3200
Source: Chroma ATE Inc.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
<저작권자(c) 연합뉴스, 무단 전재-재배포 금지>
Regenerative Load
(TAOYUAN, Taiwan, May 19, 2020 PRNewswire=연합뉴스) The 62000D Series bidirectional power supplies with power rated 0-600V / 0-120A / 18kW newly launched by Chroma ATE are packaged in a 3U (13.3 cm) high power density design. This series offers two-quadrant operation, enabling both DC power supply output and regenerative DC load. The absorbed energy feeds back to the grid with a conversion efficiency up to 93% and can operate in constant voltage, constant current, and constant power modes. Compared to traditional power supply and load, the 62000D bidirectional DC power supply saves space, reduces energy loss and heat dissipation, and is easier to wire and configure.
Chroma 62000D also works as a battery simulator. Using softpanels, it can simulate state of charge (SOC) conditions or load specific battery characteristic V-I curves to conduct charge and discharge evaluation and testing of the onboard charger, storage device and motor driver. Its front panel intuitive touch screen and intelligent operating interface greatly shorten the test time and simplifies complex test processes.
Renewable energy sources such as PV, EV, fuel cell, and battery are the market trend as the replacement of traditional energy sources. With increasing adoption of electric vehicles worldwide and the growing demand of energy storage batteries for grid connection, the distributed energy storage in microgrids is being commercialized faster than ever. The bidirectional design of power conversion devices requires battery applications to achieve high efficiency, high voltage conversion, and high power density direction, which prompts the need for battery simulation (bidirectional power supply) testing designs.
Application
- Charge/discharge testing and life cycle testing, including BOBC, DC-DC conversion, and PCS
- Motor driver testing for DC-AC power supply and energy feedback
- Compliant with LV123 and LV148 standards on electrical car components testing
- I-V power source simulation of energy storage, battery, and fuel cell in microgrid labs
- Battery power simulation for testing powertrain and auxiliary systems such as electric vehicles and e-scooters, stacker trucks, and ships
Click here [http://www.chroma-group.com/chroma/new_release/62000D.pdf ] to view PDF document.
Product Contacts
info@chromaate.com
www.chromaate.com
Taiwan
Chroma ATE Inc. (headquarters)
T: +886-3-327-9999
U.S.A.
Chroma Systems Solutions, Inc.
T: +1-949-600-6400
Europe
Chroma ATE Europe B.V.
T: +31-318-648282
Chroma Germany GMBH
T: +49-821-790967-0
Japan
Chroma Japan Corp.
T: +81-45-542-1118
Korea
Chroma ATE Korea Branch
T: +82-31-781-1025
China
Chroma Electronics (shenzhen) Co., Ltd.
T: +86-755-2664-4598
Southeast Asia
Quantel Pte Ltd. (a company of Chroma Group)
T: +65-6745-3200
Source: Chroma ATE Inc.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
<저작권자(c) 연합뉴스, 무단 전재-재배포 금지>
관련뉴스
